how to build your own site for free

Our Clients


M3FORCE Simulation & Test SDR Solution is designed for 70MHz to 6 GHz and 28GHz mmWave, covering the wide ranges of major commercial frequency ranges. The SDR platform is a scalable physical-layer test solution supporting 8 x 100 MHz component carrier aggregation, tailored to verify the performance of Wideband communication standard . 

Mobirise
Mobirise

M3FORCE Platform - IMT6000/7000 is a compact test system to generate and analyze a variety of standards compliant and custom waveforms, including ,4G LTE & 5G NR* ,Wireless LAN, custom OFDM system, and custom IQ baseband model.

The simulation & test solution combines MATLAB and M3FORCE Test Platform to provide a flexible function for R&D signal generation and signal analysis of the wireless communication, including 5G NR sub-6GHz. With M3FORCE Scalable RF Module Phased Array Active Antenna, the test system can support 5G NR 28GHz mmWave.

M3FORCE Scalable RF Module Phased Array Active Antenna - IMA2800A/B is a standard commercial mmWave phased array antenna product. User can conduct with any signal generator to transmit in mmWave band, or further, integrate any baseband chip to develop into 5G mmWave commercial products like 5G NR mmWave CPE or 5G NR mmWave Radio Unit (RU).

Mobirise
Mobirise

M3FORCE Simulation & Test SDR Solution is a user friendly Over-the-Air (OTA) test system, targeted for characterizing RF modules and end-products. Combining M3FORCE Scalable RF Module Phased Array Active Antenna to perform 5G NR mmWave measurements can be a cost effective, simple, and fast setup solution.

Mobirise

M3FORCE Simulation & Test
SDR Platform

IMT 6000 / 7000 Hardware Functionality

1

Supports Time Division Duplex (TDD) and Frequency Division Duplex (FDD) operation

2

RF Bandwidth supports 8 x 100 MHz component carrier aggregation

3

Support to 16 x 16 MIMO  

4

On-board clocking or external clock with multi- transceivers synchronization capability

Sofware Functionality

1

Comprehensive physical layer test coverage of 4G LTE, 5G NR , WLAN , NB-IOT standards and custom OFDM waveforms

2

High performance configurations for R&D and Design Validation, and cost effective solutions for Manufacturing

3

5G NR sub-6GHz & mmWave Channel Sounding 

4

Flexible SDR platform “MATLAB & C++” - the system can be implemented to AWG, Spectrum Analyzer, Signal Generator , Signal Analyzer , Network Analyzer and realtime two-way radio transmission.

M3FORCE System

IMT Specification

ITEM IMT 6000 IMT 6100 IMT 7100 IMT 7200
RF Ports2 x 2 MIMO4 x 4 MIMO2 x 2 MIMO4 x 4 MIMO
RF Bandwidth (max)56 MHz 112 MHz100 MHZ200 MHZ
Frequency Range70 MHz to 6.0 GHz 70 MHz to 6.0 GHz 300 MHz to 6.0 GHz 300 MHz to 6.0 GHz 
EVM ≤ −40 dB ≤ −40 dB ≤ −45 dB≤ −45 dB
TX noise floor≤−157 dBm/Hz ≤−157 dBm/Hz ≤−155 dBm/Hz ≤−155 dBm/Hz 
MAX Output Power+5 dBm+5 dBm+4 dBm+4 dBm
Output power step0.25dB0.25dB0.25dB0.25dB
Phase Noise 0.13 °rms @ 800MHz
0.37 °rms @ 2400GHz
0.59 °rms @ 5500MHz
0.13 °rms @ 800MHz
0.37 °rms @ 2400GHz
0.59 °rms @ 5500MHz
0.20 °rms @ 800MHz
0.49 °rms @ 2400GHz
0.75 °rms @ 5500MHz
0.20 °rms @ 800MHz
0.49 °rms @ 2400GHz
0.75 °rms @ 5500MHz
TX RF 1 to RF 2 isolation 50 dB @ 800MHz
50 dB @ 2400GHz
50 dB @ 5500MHz
50 dB @ 800MHz
50 dB @ 2400GHz
50 dB @ 5500MHz
65 dB @ 800MHz
60 dB @ 2400GHz
60 dB @ 5500MHz
65 dB @ 800MHz
60 dB @ 2400GHz
60 dB @ 5500MHz
RX RF 1 to RF 2 isolation 55 dB @ 800MHz
50 dB @ 2400GHz
52 dB @ 5500MHz
55 dB @ 800MHz
50 dB @ 2400GHz
52 dB @ 5500MHz
60 dB @ 800MHz
60 dB @ 2400GHz
60 dB @ 5500MHz
60 dB @ 800MHz
60 dB @ 2400GHz
60 dB @ 5500MHz
InterfacesUSB (JTAG), 1 Gb RJ45 , Ref CLK IN/OUT , SF SYNC IN/OUT ,
RF Digital Control Interface 
USB (JTAG), 1 Gb RJ45 , Ref CLK IN/OUT , SF SYNC IN/OUT ,
RF Digital Control Interface 
USB (JTAG), 1 Gb RJ45 , Ref CLK IN/OUT , SF SYNC IN/OUT ,
RF Digital Control Interface 
USB (JTAG), 1 Gb RJ45 , Ref CLK IN/OUT , SF SYNC IN/OUT ,
RF Digital Control Interface 
Power requirements 12V DC Jack, AC Power Adaptor 100 ~ 240V / 50 ~ 60Hz12V DC Jack, AC Power Adaptor 100 ~ 240V / 50 ~ 60Hz12V DC Jack, AC Power Adaptor 100 ~ 240V / 50 ~ 60Hz12V DC Jack, AC Power Adaptor 100 ~ 240V / 50 ~ 60Hz
Operation temperature0°C to +50°C 0°C to +50°C 0°C to +50°C 0°C to +50°C 
Dimensions333 x 209 x 35 mm 333 x 209 x 35 mm 333 x 209 x 35 mm 333 x 209 x 35 mm 
Weight2.1 Kgw2.1 Kgw2.1 Kgw2.1 Kgw

M3FORCE Scalable RF Module Phased Array Active Antenna

Mobirise

IMA 2800A

M3FORCE Scalable RF Module Phased Array Active Antenna
2 x 4 Array / 4 x 4 Array 

Mobirise

IMA 2800B

M3FORCE Scalable RF Module Phased Array Active Antenna
4 x 8 Array / 8 x 8 Array

  • Point to Point or Point to Multipoint communication Multi-user MIMO (MU-MIMO) 
  • Up/Down-converter integrated
  • 2D Beam Forming with FoV of 120°
  • Dual-polarization for two layer transmission
  • Scalable antenna modular based on applications
  • Programmable beam pattern & adjustable beam width
  • Perform the beamforming and beam tracking 
  • Standard commercial mmWave phased array antenna product

M3FORCE Scalable RF Module
Phased Array Active Antenna

IMA Specification

ITEMIMA 2808A2IMA 2816A2IMA 2832B2IMA 2864B2
Antenna Element2 x 44 x 44 x 8 8 x 8
H/V P1dB EIRP29 / 26.5 dBm35 / 32.5 dBm47 / 47 dBm53 / 53 dBm
TX mode power @12V1.40 A1.70 A3.60 A5.70 A
RX mode power @12V1.20 A1.45 A2.55 A3.60 A
Phase/Attenuation bits5 / 55 / 56 / 56 / 5
Beam switch rate140 ns140 ns200 ns200 ns
Operating band27.50 ~ 28.35 GHz27.50 ~ 28.35 GHz27.50 ~ 28.35 GHz27.50 ~ 28.35 GHz
IF range2.5 ~ 4.0 GHz2.5 ~ 4.0 GHz2.5 ~ 4.0 GHz2.5 ~ 4.0 GHz
Horizontal / Vertical FOV120°120°120°120°
Supported bandwidth800 MHz800 MHz800 MHz800 MHz
Noise Figure (NF)5 dB5 dB5 dB5 dB
Duplexing modeTDDTDDTDDTDD
InterfacesIF TX Input SMA x 2 ,
IF RX Output SMA x2 , LO ref. CLK Input x1
IF TX Input SMA x 2 ,
IF RX Output SMA x2 , LO ref. CLK Input x1
IF TX Input SMA x 2 ,
IF RX Output SMA x2 , LO ref. CLK Input x1
IF TX Input SMA x 2 ,
IF RX Output SMA x2 , LO ref. CLK Input x1
Power requirements 12V DC Jack, AC Power Adaptor
100 ~ 240V / 50 ~ 60Hz
12V DC Jack, AC Power Adaptor 
100 ~ 240V / 50 ~ 60Hz
12V DC Jack, AC Power Adaptor 
100 ~ 240V / 50 ~ 60Hz
12V DC Jack, AC Power Adaptor 
100 ~ 240V / 50 ~ 60Hz
Operation temperature0°C to +50°C 0°C to +50°C 0°C to +50°C 0°C to +50°C 
Size96 x 150 x 60 mm (W x H x D)96 x 150 x 60 mm (W x H x D)201 x 155 x 56 mm (W x H x D)201 x 155 x 56 mm (W x H x D)
Weight725 g725 g1,030 g1,030 g
TransmissionDual-polarizationDual-polarizationDual-polarizationDual-polarization